Restoring Shutters

On the large job we replaced the windows many months ago for new ones. In doing so we removed the old shutters and their surrounds that they sat in. These were a real feature of the house and the customer wanted us to make something similar to what was there before.

One of the windows with plastered reveals

 We reused the old shutters, but replaced all the ironmongery and the surrounds. First we refitted the shutters then built the surrounds around them as they were all individual sizes so each had to be built to suit.
We framed below the bay windows with 3x2 this meant they weren't quite so deep and could have a wider window board.

We cut a wide architrave and machined a rope bead on the front to match the other mouldings in the house (as well as machining a smaller architrave that sits on top). We then created a frame to bring out the architrave to give the shutters the clearance they needed before fitting it all.

 Once we had done that it was a matter of installing the window boards and plaster boarding the bay so the plasterer can get it finished next week.

Three windows finished and a lot of character added back into a large room.

Tall Skirting And Wide Architrave

Although we're going to be using standard skirting through the main house, in the master bedroom and dressing room we needed to match the existing tall skirting.

This consisted of a 9 inch high skirting (which in the past they would have made on site). We managed to find a simular moulding off the shelf and with a couple of cuts on the table saw I managed to make it match the top of the old skirting excatly. I then used my biscut jointer to join this to some 7"x1" PSE which I had already added a chamfere to.

Tall skirting with stop blocks

Fitting skirting is always interesting in an old house as it can be difficult to find a fixing and the walls can be far from great. Luckily these walls were lath and plaster on timber battens, so I spent a little bit of time finding the uprights and it gave me a good fixing without too much bother.

I added stop blocks to four external corners as these are the bottom of an arched opening which I've got to add a curved architrave to next week (more on this another time!), having the blocks gives the architrave something to stop into rather than being knotched round the skirting - A much tider job!

Nice wide architrave

 

Wide architrave

 The architrave I fitted is made from two seperate peices planted one on top of the other. I love this wide architrave, I think it really sets a door frame off, much better than some of the tiny modern stuff we end up fitting!