Saturday 27 August 2011

Storage Problem

After a great 10 days holiday in Thailand I was dead keen to get back in the workshop before I went back to work. As I walk in I'm greeted by half sheets of ply everywhere and timber stood up as there's no where else to keep it in the dry. When you meet this mess it doesn't make you want to do anything!

I'm very sure that no matter how much space I have I'll fill it, but I do desperately need somewhere to store timber and sheet material. I decided that it was best to build a little lean to on the side of my workshop to house my ply off cuts and some of the hardwoods and softwoods I've got kicking around.

A simple construction of halving joints for the frame (cut on the mitre saw, then chiseled out and cleaned up with my no.778). I do think that I might have gone a little over the top on the sizes of the timbers though (4x2 and 3x2) but it's made it quite strong!

With the two sides made I added in the struts in the position where the lean-to will stay to save me having to carry anything heavier than it has to be! The rain yesterday and today hasn't helped my progress - nothing worse than working with wet wood!

Its not finished yet as the first bottom section it going to be covered in ply, to house more ply out of the rain. I've also got to properly sheet in the roof (bitumen sheets on top of the ply that I've got there already) as well as maybe add a gutter (which will help keep the rain off even more).

It wasn't up many minutes before I started loading timber into it! It's not massive but it should help for a while.

How does everyone else deal with there timber storage?

4 comments:

  1. Good idea I'm inspired! I always end up surrounded by material's no matter how often I tidy up . Cheers mate

    ReplyDelete
  2. Looks like a good solution! I'm short on storage myself.

    ReplyDelete
  3. Gorges - I've no doubt I'll fill it as I'm a horder but it should help for now.
    Brian - how big is your workshop? Its difficult to tell on your blog. glad its given you an idea to make working in there easier.

    ReplyDelete
  4. My workshop is 10'x6' its big enough for what I make at the moment, but one day I would like the one pictured in my head :)

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...