Friday 12 December 2014

Galvanised Handrail

I fitted some rather modern looking galvanised handrail this week for a customer.
This type of handrail is normally fitted outside or on more industrial buildings but it works well in this customers modern house and what's better is all the parts are off the shelf helping to keep the costs down.

Tuesday 25 November 2014

Making A Water Powered Cider Press - A Failed Prototype!

 My friend Brian and I have been on about building a cider press for ages. 
There are many simple designs we could build using screw threads or bottle jacks, but Brian is an engineer - so that would be far too simple for him! 
He talked me into trying to make a press that uses mains water press for the power to press the apples. This idea is nothing new as you can buy them on-line but they are rather expensive, our idea was to make one using cheap materials and then have the plans available for anyone that wants to make them. 
We decided to build press out of 3/4" ply (18mm) and use a wine bladder from a box of wine as the pressing part. We built the ply box to the size of the wine bladder, we knew we were taking a risk with this method as the bladders aren't designed to work under lots of pressure or if they are we have no idea what that number is.
 Brian adapted the screw cap on the front of the bladder to take some 1/2" copper pipe, this would make filling the box easier. Not shown on the pictures is the corner fillets we fitted in all the corners so the bags wouldn't be going into a sharp corner.
 Our mashing of fruit was pretty basic - a mallet and a plastic bag!
 The finished prototype! We added second side pieces so that dowels could be inserted to hold the top on and Brian fitted a pressure gauge so we could see the pressure we were working to.

And now the Science bit, straight from the brain of Brian :-

"So,

When we were pressing on the "traditional press" the "cheese's had an area of about 600 x 600 and the max force we could apply was 20T.  We probably applied less as we bent the frame before maxing the jack out.  Say we applied 10T of force.

So max force was 10,000kg or in engineering speak 100,000 N 

The area was 0.6 x 0.6m so 0.36m2

Therefore the max pressure we could achieve would be Force/Area or 100,000N/0.36m2

which we can round to about 300,000 N/m2 or 300,000 Pascal (a Pascal is 1N per m2, i.e. bugger all)

There are 100,000 Pascal in a bar of pressure.  A bar is also known as 1 atmosphere.  So the max pressure we were applying to press in a traditional way was 3 bar.  THe important thing to take away is the pressure in in the order of a couple of bar and not hundreds of bar which is used for olive oil presses.

Mains water pressure varies between 1 and 5 bar in the UK and I happen to know that we get around 2 bar at our place.

This is because you can also calculate pressure in "head" terms, which is essentially the pressure generated by a vertical pipe of water.  The important thing is that the static pressure (the pressure when there is little or no flow) is only dependent on the height difference between the water supply and the delivery point.  For every 10m of height difference the pressure will be 1 bar.  I happen to know there is at least 20m of height difference between the back shed and the water tanks, so there is at least 2 bar of pressure available to squeeze apples (assuming the bladder doesn't pop)!"

Goggles, we decided, were essential!
We had the science sorted, we had the box built and we had some pears to squeeze.
Juice!
Early signs were good, and juice started to flow. The pressure was making all the ply bend  and there was some serious creaking going on. 
We added straps around the outside as extra support, and then increase the pressure, then there was a small hiss and we decided to stop the experiment.


Unfortunately the bag failed. A small hole formed where the bag creases in the corner.
Unfortunately the bag had failed. It was only the smallest of holes, but we knew we were working with a bag that wasn't designed to be taken to this sort of pressure. 
It was good fun to design and build something like this even though it didn't work properly. 
I'm ever the sceptic and I couldn't quite believe the pressures that I was told we'd get off the tap (Theirs is from spring water with a header tank), but when we were pressing with it and the ply was trying to form the shape of a ball I understood the forces we were working with!
So although it's back to the drawing board I learnt a lot from this project and the next one will be even better! Although I don't think we'll bother until next year now though!
Anyone else spent time designing and building things only for them to fail?

Sunday 9 November 2014

Splicing In The Dark

I know of no carpenter that enjoys spicing. Let alone when it's in the dark. On the top of a ladder.
 A friend had a sash window where the bottom had rotted out of the top frame. I'm pretty sure I wouldn't have done the job if he wasn't a friend as it was very awkward without a 100% chance of it working. The timing was down to me, as it was the only time we could both fit it in.
 I machined the piece in advance, ready to fit. I broke the old piece away and cleaned up all the tenons. I then marked the new piece up, halving joints on either ends with mortices to join in the mullions in the middle. I was a fiddly job at the top of a ladder. 
 I then glued and screwed the piece in a place and used linseed putty to seal the glass. My putty skills are far from the best but it's so infrequent that I use it now, it will look fine when painted though. 

The window should last a few more years now, I've told him it's essential that he paints on to the glass when he paints the window as this is the only way you properly seal a window with putty.
Left home at 7 at night and got back in around 12 - not everyones working day!

Saturday 1 November 2014

Can Rotator Prototype

This is a repeat post form my other blog but as it's a wood working project I thought I'd add it on this blog as well.

As any one that reads this blog knows, our house isn't massive. So I'm always looking for new storage solutions and lately I've been looking at making some can rotators for the pantry. This is so we can keep a better stock of cans and always use the oldest first.
My prototype model
 The idea is to make a door for our under stairs cupboard that contains all of our canned goods and rotates the stock for us as well (few things annoy me more than wasting food). The door will be made out of ply and have six rows of cans on the front, and use a castor to help it open smoothly.
Pull the oldest can out first and new ones go in the top
The prototype works well and is ideal for screwing to the wall and keeping a dozen cans in and although it looks basic it would be great for someone to keep tinned dog food in their garage.
I thought I'd post this up here and see if anyone else has any ideas for can rotators or any links I should look at for inspiration? Cheers for your help guys!

Saturday 13 September 2014

Altering The Layout Of A House

A friend and customer of mine does drawings for a living (in fact he did the drawings for my own extension), so I wasn't surprised when I went to do some work on his hous and there wasn't a single drawing to look at! We were completely changing the layout of the upstairs of his house. the upstairs was two bedrooms, a lot of landing space and an airing cupboard. 
New hole into the second bedroom
 He decided that by creating the access to the second bedroom off the stairs he could then use all the landing space and a small amount in the bedroom to create a new bathroom upstairs. It's difficult to explain what he's done without seeing a floor plan but it really works well and makes much better use of space.
An area in the second bedroom where the bath was going to go

handrail and airing cupboard to be removed

New steps built. A job like this takes a surprising amount of time as it's a really fiddly job to do!

Staring to build the bulkhead over the stairs to form the new bathroom and make the most of that space over the stairs that's often wasted.

New door way into the second bedroom, brought out into the room to allow for the steps the other side of the door. I hung the door before plastering or plasterboard so it could just be removed when the plasterer comes and refitted afterwards (saves me a repeat visit)

Studwork for the bath ready to be boarded.
Dan was really pleased with how much I got done in two days, especially considering how much thinking was involved to make sure everything was in the right place and making the best use of space. 
By using someone to redesign the layout of your house it's surprising how much better it can make a house flow and I'd say you'd also add a lot of value as well. His website is here and I really recommend him for any drawing work you need.

Saturday 6 September 2014

Oak Trellis

Some oak trellis for a customer fitted during the end of August.
Fitted between brick piers 

The panels scribed in to the brickwork giving a really nice finish


The finished panels oiled up

Blending in well with the garden
I was really pleased with the way that these looked when they were fitted. They really worked well in the garden and the customer was really happy with them. 

Saturday 30 August 2014

Scribing Shelves

The other day I had to scribe a shelf to go on top of a plastered wall to mark the transition between that wall and the stone wall above. 
A well scribed shelf!
That meant scribing it to the stone work. 
I use a pair of compasses to mark mine, setting it to the widest point and then marking the board from there before cutting it with the jigsaw. As I work on old buildings a lot, it's a job I have to do quite often so over the years it's become easier and easier - although I challenge anyone to get it right first time!

Saturday 23 August 2014

Cupboard In A Cellar

Last week I build a cupboard in a cellar for a customer. They left it largely up to me on what I built, it was mainly to hide the gas meter and the water filter to make it all look a bit more presentable as they're selling trying to sell the house.
Frame work in - made harder by the fact I couldn't drill any holes in the walls due to the tanking. Instead I wedged all the pieces in place and used a frame fixing foam.

Adding WBP ply to the outside

Adding kitchen hinges on the doors

The finished cupboard - looks much smarter now

The large door gives easy access to the gas meter and to to the water filter

Saturday 16 August 2014

Fitting An Oak Stairs With Winders

an interesting job this week where some of the guys I work with and myself fitted a flight of oak stairs in an old property.
Flight in place and starting to get glued and pegged together

Fitting the winding treads

You can never have too much glue when putting together a flight of stairs!


Glue blocks added to stop any squeaks!

Ready for some handrail and spindles

The finished item!

Landing upstairs 


 It took a little longer than we expected but they went in well and looked great when we were finished. I think it's a full year since the last time I fitted any stairs so it's good to keep the skills in my mind.

Friday 8 August 2014

I've Got The Van Sign Written

I've finally got around to having the van sign written!


I'm pleased with the result. What does everyone think?

Wednesday 30 July 2014

Changing Brushes

An aspect that customers never see is the care and maintenance of my tools and the day to day running costs to keep all these tools working. 
The impact driver is an essential part of a modern carpenters tool kit
 My impact driver is an example of this. This week I've had to purchase two new batteries (coming in at over £50) and replace the brushes to keep it working.

Brushes worn out from lots of use!

The old worn brush on the left and what it should look like on the right

New brushes in place - no down time at a customers house now!
The constant maintenance, sharpening, repairing and updating kit takes lots of time and costs a lot of money every year. A modern and efficient carpenter has to have far more kit than any other trade in the building industry.
Related Posts Plugin for WordPress, Blogger...